One of the reasons that you are here is that you came across the IP address or Internet Protocol address – 192.168.10.1. You might have come across it while configuring the router or the network or connections for devices such as webcams and VOIP telephones. This article explains everything you require to know about 192.168.10.1 Internet Protocol address.
Wondering what Internet Protocol addresses are? You may know it by the name IP address. Internet Protocol address is unique for each device that is having an internet connection. This address is in numerical format. This helps to identify the location and identify the interface or even the host.
It has been broadly divided into two categories, the first category is private, and the second category is public. The fundamental distinction between the public and the private IP addresses is the limit to which you are allowed to access it. As the name suggests, public IP addresses are meant for open access and so can be accessed by anyone. It does not follow any strict protocol in regards to access, whereas to get access to a private IP address can be a very challenging task. One cannot access them without thinking critically.
The IP address that we are talking about is 192.168.10.1. It is a private IP address. Most IP address requires to have coordination with the registry of IP address. 192.168.10.1 does not require this coordination. As it is not a public address, multiple devices in a variety of private networks are there. The thing that should be taken care of here is to make sure that there is no collision of IP addresses in a closed system that is the same.
The Question That Arises Now Is, What Does 192.168.10.1 (IP address) Do?
It is not at all challenging to get online and access the unlimited source that is available on the internet. But you may not be able to access web pages at a time. There can be an issue in your router due to which you could not have access to the web page. It is now when you will come across 192.168.10.1, the IP address when you are setting the router. You may also come across it when configuring devices like webcams and VOIP telephones.
The number of devices that has a connection of the internet is increasing at a rapid speed globally and reaching new highs. Currently, about 26 billion devices are connected to the internet. Out of these, only about 4 billion IP addresses are public. It is known as IPv4 or Internet Protocol Version 4.
Note that it is not necessary for every device that is connected to the internet to have its IP address. But as stated earlier, the IP address is essential to identify devices that are connected to the network. Without it, identification will be impossible. To avoid the exhaustion of IPv4, a solution was given by the Internet Assigned Number Authority or IANA. The solution offered by this American organization was what we discussed as Private IP addresses above — a unique address for every router.
You can follow a few simple steps to log in to 192.168.10.1.
The steps are as followed.
Step 1 – Installation
You have to make sure that your connection is very good. Also, check that the connections are proper. Make sure that the power for WAN (Wide Area Network), LAN (Local Area Network), and WLAN (Wireless Local Area Network) are on. Next, check if their lights are on; wait for the light to get stable. The views that are next to it (mostly three) should flicker.
When the installation becomes successful, you can start with the next step.
Step 2 – Router’s IP address
Initiate by opening the browser that you use. Now, type or copy – http://192.168.10.1. Hit enter. Now, if an error message flashes on the screen, it implies that your IP address is incorrect. Make sure that you have not mistyped anything, or the computer did not autocorrect any of the spellings on its own.
Step 3 – Login
The page that will appear now will ask you to enter your username and password. There are several default usernames and passwords for 192.168.10.1. They are as follows:
a.Username – admin
Password – admin
b.Username – admin
Password – DZY-W2914NSV2
c.Username – admin
Password – Motorola
d.Username – admin
Password – 1234
e.Username – admin
Password – password
One of these usernames or passwords will work only if you never changed them. In case you did, then typed the one you changed it to. If you cannot, you recall the password, and then you will have to recover it.
Step 4 – Configuration
Once you fill in the username and password, the gateway for your router opens. Now, you can configure the router precisely as you wish.
If 192.168.10.1 causes troubleshoot, the significant reasons for it can be three. Knowing the ideas will help you identify the cause and then rectify it. The three reasons are as follows –
Internet Protocol Address
Entering the wrong IP address will either show a page stating that the IP address is invalid or it will take you to some other page. This mostly happens due to mistakes in typing or autocorrect modifying the address on its own. To avoid this hassle, go for copy the address and paste it instead of typing it down.
It is a cable that helps in attaining a more speedy connection than usual among two or more devices. Generally, the routers require a connection that is physical before granting access to the admin panel of the IP address – 192.168.10.1. Connecting them to Ethernet cable solves the problem.
The best part about these cables is that unlike other physical mediums, these are not time-consuming.
The only cause left for the persisting problem is a faulty router.
To eliminate this problem, you may have to contact the helpline number given to you for the router. They will tell you what you can do to make your router work properly.
To conclude, the IP address – 192.168.10.1, grants the user permission to access their router’s admin panel.
You can always find me with a cup of coffee Googling anything and everything related to the networking. Refer to our detailed How-To Guides on wifi routers and never face any issue with router again!