This blog is about getting familiar with IP Address The world has a new addiction to drugs called the internet. It is a demon because it has hypnotized and possessed control over each and everyone in this world right now. We all are addicted to the internet, which is a good and bad thing at the same time.

We get anxious if the speed of the internet is low. Our condition gets even worse if the internet is cut off unexpectedly. To fulfill our thirst for the internet, we install Wi-Fi routers and create a home network with high speed and performance.

This router needs to be assigned an IP address, which transforms the router into an access point for all the net-enabled products. It is considered a unique string of digits separated by points that uniquely identify your device connected to the internet.

Know about other IP addresses:

Features of IP Address

Today, we are going to talk about the IP address It is one of the IP addresses that can help establish a connection between the router and the internet. is a private IP address that is mostly utilized by networking devices like webcams, modems, and routers. belongs to a particular IP range booked from IANA (Internet Assigned Number Authority) for specific purposes. A private network needs to use Network address translation to connect to the internet.

IANA has reserved many individual address blocks for the next generation of IPv6 addresses, and often a proxy is required to access the web. Every router and modem have login credentials and an IP address that allows you to access the settings. If you have an internet connection in a network, you can access the internet from a specific IP address. For example, if you have a router, you can use this IP address to access settings on some of the different types of routers. This includes TP-Link routers, 2Wire router, ADSL router, Buffalo router, 3Com router, and Westernell ADSL modem. We will introduce you to all the essentials of that you need to know. By the end of this manuscript, you’ll be a pro when it comes to So, without further ado, let’s get started.

See also: How to Setup Port Forwarding | Complete Guide

Logging To IP Address?

For logging into, follow the steps below:

  1. Open your favorite browser.
  2. Enter the IP address ( in the search bar. You will see the login page.
  3. Type the username, followed by a password. If you have a new router with a private IP address, you must have a default IP address and password and use the following to find out the default username and password.  Most of the router’s info is printed on the box itself, but if you can’t find the box, you have to press and hold down the reset button for about 10 to 15 seconds.
  4. Change the SSID, Although you’re using a private IP address for your network.
  5. Change the default username, followed by a password. It might be a private IP address, but you need always to ensure you make your connection secure by changing the default credentials.

And that’s it! You will log in at

See also: How to Troubleshoot Router | Top 5 Solutions

Forgot The Default Username And Password?

It is human to forget the default username and password. No worries, we have two solutions for this widespread problem faced by multiple users.

The user manual:

The user manual contains all the essential information regarding the router. One of the pieces of the data widespread is the default username and password. Hence, it is mandatory to preserve the user manual.

username and password

The Sticker On The Box

The default username and password are printed on a sticker that is pasted at the back of the box. the sticker on the boxIt also holds information like IP address and model number. Here is a guide on Admin Login, Password And IP.

How To Reset The Router To The Default Configuration?

If you forget your username and password and the above two techniques to acquire it fail, then the only way to access the dashboard of IP address is to factory reset the router. Nonetheless, factory resetting will require you to rearrange your router and all its devices.

The ways to factory reset your router are:

  1. Refer to the user manual. The user manual contains the mechanism for resetting your router.
  2. Another method is to press and hold the reset button at the back of the router. To reset your router, all you have to do is hold down the reset button and watch it go back to where it was before.

See also: Top Remote Desktop Connection Manager to Use in 2023

How To Fix The Issues Related To IP Address?

Getting into the router’s hardware portal using is a tedious process. It becomes even more frustrating when everything’s going fine while following a guide, and suddenly an error pops up. Hence, we have picked the most occurring hitches and provided some simple solutions to eliminate them.

One of the errors that you may face is while establishing a connection using To prevent these issues, check the cables if you are using Ethernet. Check if everything is under good security. Tighten the cable beforehand.

router issues

For those who are using a wireless connection, turn off your Wi-Fi and reconnect. Confirm that the router is on and working properly. The flickering of green lights is an indication that the router is working properly.

Another issue that you may face is regarding incorrect IP addresses. It indicates that you are using the wrong IP address the entire time or changed at some point in time. In this case, you need to find the correct IP address of your router. Don’t worry if you don’t know how to find your IP address. We have explained it to the next topic.

How To Find The Router’s IP Address?

The IP address depends on the Operating system that you’re using. We will be covering the method for Windows OS.

One way is to check using Windows settings. Just go to the network and internet settings and click on Wi-Fi if you’re using wireless and Ethernet if you’re using a wired network. Select the option to show the properties which will be located somewhere in the middle of your desktop. Here, you will find the IP address that you desire.

Another option is to use the command prompt. Type ‘cmd’ in the search tab and open the command prompt. Type ‘ipconfig’ and hit enter. This will provide you with the IP address.

So, these are all the essentials that you need to know about We hope this manuscript was useful to you. Don’t forget to shower your valuable feedback on us. Your feedback is what keeps us motivated to keep writing. Happy browsing. Thank you and adios until next time!

See also: How to Find Default Router Gateway in Mac, Windows, Android & Chrome


What is the 192.168 1.1 password change WiFi password?

Firstly, open your web browser and enter Utilize the default login information of ‘admin’ and ‘1234.’ After logging in, go to the ‘Basic’ section and choose ‘Wireless LAN (WLAN) Settings’ to change your WiFi password.

What is my IP address for codes 192 168 11 1?

The IP address is a part of a private IP address range authorized by the Internet Assigned Numbers Authority (IANA). This particular IP address finds common usage in local area network connectivity. Its non-uniqueness sets it apart, allowing for its easy application across various networks.

What to do to find the IP’s password?

Start by confirming that the router is powered on and remain patient until it completes the restart process. The default settings include an IP address of and a default login username and password set to ‘admin’ (all lowercase).

What is a WIFI admin login?

It's important to emphasize that ‘admin/admin’ represents the most commonly used router login and password combination for accessing IP addresses. Nevertheless, it's worth noting that this can vary depending on the specific router model. If you require other combinations for access, you can explore a list of standard router logins to discover alternative options.


This is all about the IP Address We hope that this article was useful and informative to you. Please tell us your reviews in the comment section. Here is a guide on admin Login, Password, and IP.

Leave a Reply